The Hawk is our most sold electric model, and the reason is easy to understand. lt is a high performances all moulded electric model, that reaches a very high efficiency in flight while maintaining the easiness of flight of a good trainer and is able to perform most aerobatics. You will not need an extremely expensive motor to fly or Hawk, a speed 600 geared with 8 4/5SC cells are already enough; if you like the structure is strong enough to permit the use of brushless up to 400 watts. The wing is in two piece for an easy transport, is fully moulded in fiberglass with carbon reinforcements, and uses the all purpose SD 7037 profile, slightly modified to suit our needs. The fuselage is in fiberglass reinforced with carbon and is able to resist to slope flying and has room enough for a big motor and up to 10 cells. V-tails are now all moulded, light and strong and easily removed for transportation.
The Hawk will need 4 servos (2 ailerons, elevator and rudder) and is suggested to use a transmitter with V-tail mix capability. (6 servos for the flap version)
It is available also the version with flaps, specially suited to those flying in fields with a narrow landing place.
On request it is available also a special carbon-kevlar fuselage and the full carbon version

Technical Details : Wingspan : 2.0 m Fuselage Length : 1.04 m Wing area : 38 sq.dm Airfoil : SD7037 modified Empty Weight : 0.85 kg Flying Weight : 1.55 kg Control Surfaces : Aileron, Flaps (option) and V-tail

To prepare this model for flight you will need : 2 (or 4 for Flap version) wing servos, max 13mm thickness 2 mini servos 6-8 channel receiver 600 motor geared 2.8:1 or brushless. Speed controller